OEM ISO9001investment Casting Parts All Die Cast and Forging Parts Steel Alloys with All Steel Grades Die Casting Parts

• Casting Method: Thermal Gravity Casting
• Process: Precision Casting
• Molding Technics: Gravity Casting
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CB029
• Application: Petrochemical Machinery
• Material: Stainless Steel
• Surface Preparation: Sand Blast
• Surface Roughness: Ra3.2
• Machining Tolerance: Refer to German Investment Casting Tolerance Stand
• Standard: AISI
• Certification: ISO 9001:2008
• Service: One Stop Service. Machining-Assembly
• Customized Support: OEM
• Type: Marine Machinery
• Quality Control: 100% Inspection Before Packing
• Place of Origin: Foshan, China
• Lead Time: 30-45 Days After Payment
• QC: Engineer and Inspector
• CNC Machining: Accept Customized
• Production Capaciy: 200 Tons Per Month
• Finish: De-Burr, Blasting, Polishing, Powder Coating
• Weight: 0.1kg up to 50kg
• CNC: Drilling, Tapping, Milling, Thread
• Mold: Silica Sol Zircon Sand Mixed Slurry Production
• Heat Treatment: Quenching, Tempering, Annealing, Nor
• Tolerance Grade: 4
• Transport Package: Bubble/Poly Bag+Carton Box
• Specification: Stainless Steel
• Trademark: ZEREN
• Origin: Guangdong
• Production Capacity: 60 Tons/Month
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 3.000kg

Product Description

OEM ISO9001Investment Casting Parts All Die Cast and Forging Parts Steel Alloys with All Steel Grades Die Casting Parts

Product Name	Machinery Casting Parts
Brand name	Zeren
Material	Stainless steel
Feature	Marine Machinery
Process	Investment Casting + CNC Machining
Certification	ISO9001:2015
Customized support	OEM

 

 

Product General Specs:
Material	Austenitic stainless steel: 201, 303, 304, 316, 316L, 1.4581, scs14, scs16
	Hardened stainless steel:17-4PH, 410, 420, 440C
	Alloy cast steel: 4140, 4150, 4340, 8620, GS-25CrMo4
	Casting alloy tool steel: CS-2, CS-7, CrWMn
	Carbon steel: 1020, 1025(WCB), 1030, 1040, 1045, 1050
Weight	1g-30kg
Casting tolerance	CT4-CT7/GBT6414-1999; VDG Merkblad P690
Surface Roughness	Ra1.6-Ra6.3
Thickness	Min 2mm (1mm in Micro-region)
Casting Radius	Round radius ≥0.3mm, Internal fillet radius≥0.5mm
Blind Hole Depth	Max 30mm (Diamter 10mm)
Machining	Turning,Milling,Drilling,Boring,Threading, Grinding,CNC Machining & test equipment
Heat Treatment	Annealing,Hardening, Normalizing,Carburizing, Aging
Surface Finishing	Black Oxide,Black Coating,Anti-Pollution Flashover Coating,Mirror Polish
Industry Standards	ASTM, ICI, BS, DIN, JIS, ISO
Design Software	Pro-E, UG,Solidworks, AutoCAD
File Format	IGS, STP, XT, PDF, JPEG, JPG

Case & Solutions
 

Our Case1 & Solutions:

 

Cooperation with HUAWEI - Wrench Casting Parts
 

In 2012, our company developed a product for HUAWEI: wrench casting - tool door and window hardware (As shown below), the material is A3 steel.

During the production process, we found the following problems: because the casting is easy to deform, subsequent shaping is difficult. , and after the surface is polished, it needs to be plated with copper and then chrome-plated.

At the same time, electroplating will have a magnifying effect on surface defects, and sand holes are prone to occur, resulting in rework or even scrapping after final polishing. Therefore, we recommend only casting the head of the product.

The rear plane part is processed by steel plate and then butted together, which does not affect the performance of the product, and overcomes the above defects, and reduces the cost by about 50%.

Our Case2 & Solutions:

 

304 Stainless Steel Diffuser Impellers & Steam Valve

In 2016, our company produced diffuser impellers (impeller accessories) according to the drawings provided by customers (As shown below), the material is 304 stainless steel.

This product contains five curved air-dissipating holes. It is very difficult to open the mold, make the shell and remove the sand, resulting in a high scrap rate.

In this regard, after research and discussion, our engineers decided to use a sand core material that not only has high temperature strength but also is easy to remove sand after high temperature, and finally perfectly solved the problem of curved hole casting.



In addition, there is also a steam valve (As shown below), the material is 316 stainless steel, due to the small opening and complex inner cavity, finally successfully solved the problem for the customer by using this sand core material, produced the product, and established a long-term good cooperative relationship with the customer.

Our Case3 & Solutions:
 

316 Stainless Steel Pressure Vent Valve Body
 

In 2018, our company produced the pressure vent valve body (valve accessories) for customers (As shown below). The material is 316 stainless steel.

Because the opening is too small, the inner cavity is small and complicated, and it is almost impossible to clean the internal sand core. Clean, so we opened a square hole on the back of the product, welded it with a stainless steel square plate, and opened a dovetail groove at the weld, which is conducive to a strong weld.

We also used a sand core that has both high-temperature strength and is easy to remove sand after high-temperature action to make this product. After the casting was processed, the air-tightness test was carried out, and was successful, so the product was mass-produced , and finally met the customer's requirements and won the trust of the customer.

Our Case4 & Solutions:

 

Coffee Pot Casting Part
 

In 2020, our company produced the main casting of the coffee pot - kitchenware and bathroom hardware for an Italian customer (As shown below). The material is 316 stainless steel. Through communication with the customer, we learned that the customer has verticality requirements for the center of the upper and lower parts of the casting, but due to The inner cavity of this product is complex, and it is impossible to make a mold as a whole.

Therefore, we divided the wax mold of the part into upper and lower parts and made them separately, and then assembled the wax molds of the upper and lower parts into a whole.

The combined wax mold successfully passed the verticality tooling inspection procedure. , and finally all aspects of performance have met the customer's requirements, so the customer is very satisfied with our professional technical level and perfect product quality.

Our Advantage:

 

All of our items is silica sol investment casting instead of water glass investment casting.
 

Water glass method dewaxes into the high-temperature water, and the ceramic mold is made of water glass quartz sand. Silica sol method dewaxes into the flash fire, and silica sol zircon sand makes the ceramic mold.
 

The silica sol investment casting can get a better surface roughness Ra3.2.
 

Company Introduction



Foshan Zeren Precision Casting Co.,Ltd. is founded in 2009, with a precision casting plant and a mechanical processing plant, located in Zhaodaxinzhao Industry Park in Shishan Town of Nanhai District of Foshan City, Guangdong province. 

 

We use advanced investment casting(lost wax casting) process for precision castings production, which are made of Stainless steel, carbon steel and alloy steel. We can also provide subsequent machining of casting, and have passed and implemented the ISO9001:2015 quality management system.
 

 

Why Choose Us

Look to Precise Castings for your next casting need!

 

Stainless Steel Casting • Carbon Steel Casting • High Alloy Casting • Low Alloy Casting

Heat or Wear Resistant Casting • Nickel Casting • Titainum Casting

 

Zeren Precise Casting is the #1 Investment casting company in our region.

Tolerances For Investment Casting





FAQ 

Q1: What size products can you produce?
A: We can produce products of various sizes for different industries, weighing anywhere from a few ounces to as much as 250 pounds.

Q2: What materials can you cast? Can I OEM logo on the product?
A: We work with a variety of materials, including stainless steel, carbon steel, aluminum alloys, copper alloys, nickel-based alloys, and more. We can assist in material selection based on your specific requirements. Yes we can OEM logo.

Q3: What surface finish can be produced?
A: Ra3.2, and the machining finish can reach about Ra0.4. Other surface treatments can be done from electrophoresis, blackening, polishing, galvanizing to chrome plating, etc.

Q4:  How to get sample?
A: Sample is acceptable. Please tell us what product you need. 

Q5: What kind of CAD files can I send? How do I upload a CAD/large file to you?
A: You can send anything you run but the most beneficial are UG, STP, or Parasolid. 

Q6: What's your payment policy?
A: For the sample order, our payment policy is 100% T/T payment (Telegraphic transfer payment) in advance or other payment method. For the bulk order, our payment policy is 30% T/T in advance, 70% balance should be paid 7 working days before delivery.

Q7: How long is your delivery time?
A: It depends on product quantity and specific requirements. Usually sample needs 7-10 days, mass order needs 20-50 days.

 

Certificate